Heavy Duty Bolt Threading Machine - Elabengineering
Elab Engineering Product Name: Heavy Duty Bolt Threading Machine Elab Engineering Product Code:
Code: bpi1001
Description and Specification for Lab Tenders
Heavy Duty Bolt Threading Machine.
SR. NO.
PIPE NOMINAL
BORE
SPINDLE R.P.M.
APP
POWER REQUIRED
HP R.P.M.
1.
1/2" to 1.1/2"
90 & 120
3 1000
2.
1/2" to 2.1/2"
60, 90 & 120
7.5 1500
3.
1" to 4"
40, 75 & 115
10 1000
4.
2.1/2" to 6"
25 & 50
15 1000
Pipe End Facing Machine 2.1/2" to 6"
Pipe Threading Machines are designed to give maximum efficiency
and reliable performance under the most severe conditions of service
with minimum maintenance cost. All the necessary requirements are
combined in this model to form the basic fundamentals of correct
threadings. All the gears are made of case hardened steel with extra
large face width and tooth thickness and cut onhobbing machine
for noiseless operation even at high speeds. Naturally they are built
with high standards of workmanship, material and quality. Headstock :
The Headstock is of top quality casting proving support to the
spindle bearings. The spindle swing or taper roller bearings are of best
steel with a grounded finish to give accurate results. Gears of Head
Stock are running in Oil Bath with Oil level window.
The Bed :
The Bed is pillar type having two pillars made of best steel,
nicely grounded and also aligned accurately to the headstock alignment.
The Saddle:
The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stock alignmernt.
The Apron :
The Apron gives movement to the Saddle with head transfer along
with pillars through steel rack and pi8nion arrangements. Its all gears
are made of best steel.
Vice Jaws :
The Vice Jaws are fitted on the saddle with V-ways accurately. The
jaws are made of best steel and are well hardened. The movements of
jaws are controlled by a screw on the saddle.
Lead Screw :
The lead screw attachment is an extra device which has been arranged to support thethread cuttingchassers in big threading machines, only having eleven TPI range.
